This article will guide you through the setup process on a Panasonic Viera Smart TV.

While we have not tested the service on the Panasonic Smart TV ourselves, we know the service works based on feedbacks from customers who had tried it on their TV.

Please note: These instructions are generic Panasonic Smart TV instructions, so some steps may differ on your TV. However, it should be good enough as a guideline for you to follow to update the DNS settings on your TV.

Firstly, please Login to our website, www.simpletelly.com from your computer and take note of the fastest DNS server address that appears on screen.

Now, click on Check My Setup.

If this is the first device you have setup from this location, you will probably need to register your current IP address. Click on Register your new IP address.

If the registration is done from a computer browser rather than using the device's browser, you will get an error 'Your DNS settings are not configured correctly' on screen.

You can disregard this as the DNS is set up on the device and you just need to ensure that the Registered IP address is the same as your Public IP address.

On your Smart TV:

1) Select Settings
2) Navigate to Network Settings
3) In Network Settings, select IP Address/DNS Settings
4) Select DNS Setting Mode
5) Select Manual
6) Fill in the Primary and Secondary DNS box with the addresses that you got earlier from our site.

Now that you have setup and registered your system you can go ahead and access the TV site of your choice and stream it like you mean it!

If you would like any further assistance, please send us an email to support@simpletelly.com and we will do our best to assist you.